(A) The standard "K" cylinder holds 249 cu ft of oxygen at 70 degrees F.

(B) The OXARC HIGH CAPACITY 4500 cylinder holds 504 cu ft of oxygen.

• You handle half as many cylinders so you make only half as many connections and disconnections.
• Since you could get the equivalent of two cylinders of product in only one cylinder, your labor cost associated with cylinder handling would be cut in half and employee productivity increased.

	"K"	"T"	OXARC High Capacity 4500 psi
Oxygen	249	337	504
Nitrogen	228	304	443
Argon	248	336	496
Air	233	311	454
Helium	217	291	432

• With the increased capacity of the OXARC HIGH CAPACITY 4500 cylinder, your cylinder inventory could be reduced by as much as 50%. That frees up your valuable floor space.
• Add to that your savings on reduced inventory carrying cost, and it becomes obvious that the OXARC HIGH CAPACITY 4500 psi cylinder adds more dollars to your bottom line.

Every way you look at it, the new OXARC HIGH CAPACITY 4500 psi cylinder cuts down on the cylinders that you must order and handle every month. And that is a savings to you!

2 Outlets, 0-3,000 psi and 3,000-6,000 psi Eliminates the need for expensive step-down regulators

The OXARC High Capacity 4500 psi cylinder has been fitted with a new DUAL-OUTLET valve, which makes this cylinder completely interchangeable with your existing cylinder gas supply system. It has two ports - one for 900 psig, and the other for 4500 psig - giving you the convenience of working at either operating pressure.

• The high pressure outlet of the DUAL-OUTLET valve provides actual cylinder pressure much like a standard cylinder valve. A specially designed lower plug incorporates a spring loaded seat disk which tends to keep the valve closed as the valve handwheel is rotated. This SLOW-OPENING feature prevents the rapid pressure rise associated with standard cylinder valves. With the slow pressure rise characteristic, lower temperature rise is also obtained. This feature prevents chamber ignition and provides enhanced oxygen service safety by reducing the potential of regulator burnout and regulator ruptures. The slow opening feature of this new valve also reduces the likelihood of personal injury and property damage.
• The low pressure outlet connection provides a lower pressure product for lower pressure customer regulators. The pressure reducing mechanism is factory set at 900 psi and is not adjustable by the user.

• Cut labor Costs
• Enhance Productivity
• Minimize Cylinder Changeout
• Decrease Residual Product Loss
• Reduce Cylinder Rental
• Reduce Cylinder Inventory
• Improve Floorspace Utilization

Remember that this cylinder holds twice as much gas as the "K" and 50% more than the "T" cylinder, is no taller than the "K" or the "T", and is better balanced for easier handling.

The new valve enables you to operate at a conventional 900 psig discharge pressure or at 4500 psig.